Dieses Wiki ist ein Archiv bis 2023. Das aktuelle Wiki findet sich unter https://wiki.hamburg.ccc.de/
ChaosVPN
Contents
ChaosVPN 1.0
TINC SETUP
At the moment the Hamburg ccc Erfa uses TINC together with some dirty perl-scripts, which are used to read the routes and peers.
For this Setup we have howtos for Debian and Gentoo (in german).
Beginninig in 2003
(haegar:) For me the whole setup with Openvpn was to complicated. It would take some time till its done and the scaling problems were forseable.
Therefore i took time today to get a working mini-solution with tinc running real quick.
The bigger issues with ip-submission and database are able to be added later without any big effort.
Most importand design goals were:
- data traffic between participants must not rely on the ccc infrastructure.
- failure of any parts of the infrastructure must not shut down the network completely
- no work needed for participants just because a new participant is joining or a old one quitting.
system requirements
- linux only first
- tinc is availible for nearly all unix variants and windows, but my perl script is only working on linux so far.
- perl with LWP and https support
- working dyndns hostname that conains the actual router-ip or static ip
Update 2006
Today (2006) i would implement things different than i did before, but when this happens is completely up in the stars. Until there is a better setup we will use the old setup.
ChaosVPN 2.0
redesign
The Rebuild of the ChaosVPN became nessesary at some point, as the vermittlung is blackholed. Furthermore we would like to put live back to the ChaosVPN and use it to interconnect the hackerspaces.
So we thought its a good time to redesign stuff. We will climb up to tinc 1.0.10.
software
Config builder
Currently we are porting haegars script from perl to c and strip off curl and openssl, so it fits in a OpenWRT box.
OpenWRT Packages
Blogic will build a special OpenWRT package, which is called chaosvpn at the moment and a recent tinc 1.0.10 for that.
Debian Packages
Haegar updated (backported) tinc 1.0.10 packages for debian. They are availible at:
- Debian Etch: http://debian.sdinet.de/etch/sdinet/tinc/
- Debian Lenny: http://debian.sdinet.de/lenny/sdinet/tinc/
I will also create Debian packages of the config builder once it is in a usable state.
sources
The scripts are availible at: http://github.com/ryd/chaosvpn
IP Ranges and Participants:
IP-subnets | Node | unique name | Remarks |
---|---|---|---|
your subnet | your url / description | your unique name | your remarks |
172.31.16.0/23 *planned* | CCC Hamburg. | Chaos Computer Club Hansestadt Hamburg |
ccchh - Hamburg
- connector: User:Haegar
- url: http://hamburg.ccc.de
- ip ranges
- network 192.168.16.
- network
nycresistor - New York
- connector: User:openfly ( matt [at] nycresistor.com )
- url: http://www.nycresistor.com
- network Wiki: http://wiki.nycresistor.com/wiki/ResistorNET
noisebridge - San Francisco
- connector: aestetix
- url: https://www.noisebridge.net
- network setup: https://www.noisebridge.net/wiki/Network
PS:one - Chicago
- connector: tcrown
- url: http://pumpingstationone.org/
what about:
ccc hannover
- (in chaosvpn 1.0)
- connector: User:Lotho ( lotho [at] hannover.ccc.de )
- url: http://hannover.ccc.de
ccc berlin
- (in chaosvpn 1.0)
ccc cologne
- (in chaosvpn 1.0)
IP Ranges
We need to have non colliding ip ranges and therefore we need some coordination of the used ip ranges.
First of all we would like to be compilant to the used ip ranges of freifunk and dn42.
The IP ranges overall are defined in the freifunk wiki ip-net page as root source.
So we use 172.31.0.0/16 for the europeans and 10.100.0.0/13 for the americans. That should leave enough space for everone untill ipv6 is not the future but the present.
However we will not support 192.168.0.0/16 ip ranges as they are used for various other reasons. This rfc1918 ip range will stay as private to use for internal use (and in fact its used in the dn42 for routing uses.)