Dieses Wiki ist ein Archiv bis 2023. Das aktuelle Wiki findet sich unter https://wiki.hamburg.ccc.de/
Difference between revisions of "ChaosVPN:OpenWRTHowto"
Waldmeister (talk | contribs) (Final v0.1) |
Waldmeister (talk | contribs) m (link fixes) |
||
| Line 4: | Line 4: | ||
= 0. Fulfil Requirements = | = 0. Fulfil Requirements = | ||
| − | * Buy Hardware [[ | + | * Buy Hardware [[http://www.amazon.de/dp/B004YIT2ZI|Netgear WNDR3800]] or some equivalent |
* You must have read the basic [[ChaosVPN::Howto]] precisely | * You must have read the basic [[ChaosVPN::Howto]] precisely | ||
* generate your keys, choose nodename and subnet and send pubkey to openvpn team | * generate your keys, choose nodename and subnet and send pubkey to openvpn team | ||
| Line 15: | Line 15: | ||
= 2. Install OpenWRT = | = 2. Install OpenWRT = | ||
| − | * Download [[ | + | * Download [[http://downloads.openwrt.org/backfire/10.03.1/ar71xx/openwrt-ar71xx-wndr3800-squashfs-factory.img|OpenWRT for WNDR3800]] |
* Upload the Image in your Webinterface | * Upload the Image in your Webinterface | ||
* Press Start | * Press Start | ||
Revision as of 18:10, 13 April 2012
This is Howto for setting up an independent Box providing you with ChaosVPN
In five steps. Really.
Contents
0. Fulfil Requirements
- Buy Hardware [WNDR3800] or some equivalent
- You must have read the basic Howto precisely
- generate your keys, choose nodename and subnet and send pubkey to openvpn team
1. Get Started
- Open your Router and power on
- Connect wired or wireless (use information provided with your router)
- Go directly to your routers Webinterface (192.168.1.1 or 192.168.178.1) and search for sth like System -> Firmware Upgrade
- (There is no need to change any of the configuration)
2. Install OpenWRT
- Download [for WNDR3800]
- Upload the Image in your Webinterface
- Press Start
- DO NOT REBOOT, POWEROFF OR ELSE
- Wait until done (Power LED should not flash)
3. Start and Setup OpenWRT
- Reconnect Network between PC <-> Router
telnet 192.168.1.1
passwd #set a root password
- REMEMBER IT
- Go to Webinterface at 192.168.1.1
- Connect the yellow port on your router to current infrastructure
- Go to Network -> Interfaces and activate WAN Connection with DHCP or your custom internet configuration
- Navigate to System -> Software and press Update Lists
- Press Available Software tab and select C
- Search for ChaosVPN and press install
(I did also install screen at this point)
4. Prepare for launch
ssh root@192.168.1.1 # telnet won't work anymore
- edit the top part of
/etc/tinc/chaosvpn.conf
$my_peerid = <nodename> $my_vpn_ip = 172.31.<your Subnet>.[1-255]
- Copy over your keys to OpenWRT Box
# scp /etc/tinc/chaos/rsa_key.p* root@192.168.1.1:/etc/tinc/chaos # rm /etc/tinc/chaos/rsa_key.p*
5. Lift off
- start chaosvpn
/etc/init.de/chaosvpn start
...be prepared for 150 new route entries
... to be continued
