Dieses Wiki ist ein Archiv bis 2023. Das aktuelle Wiki findet sich unter https://wiki.hamburg.ccc.de/
Difference between revisions of "ChaosVPN:OpenWRTHowto"
Waldmeister (talk | contribs) m (Zwischenspeicherung) |
Waldmeister (talk | contribs) m (Zwischenspeicherung) |
||
| Line 28: | Line 28: | ||
( - I did also install "screen" at this point) | ( - I did also install "screen" at this point) | ||
| − | - ssh root@192.168.1.1 | + | - ssh root@192.168.1.1 (telnet won't work anymore) |
| − | - edit the file /etc/tinc/chaosvpn.conf to fit your needs | + | - edit the top part of file /etc/tinc/chaosvpn.conf to fit your needs |
| − | [ | + | |
| + | $my_peerid = <nodename> | ||
| + | $my_vpn_ip = 172.31.<your Subnet>.[1-255] | ||
| + | |||
| + | - generate your keys and send pubkey to openvpn team (fast response time) see [Howto] | ||
| + | tincd -n chaos --generate-keys=2048 | ||
| + | |||
| + | - start chaosvpn | ||
| + | /etc/init.de/chaosvpn start | ||
| + | |||
| + | ...be prepared for 150 new route entries | ||
Revision as of 17:42, 13 April 2012
This is Howto for setting up an independent Box providing you with ChaosVPN
- Buy http://www.amazon.de/dp/B004YIT2ZI (or some equivalent Router)
- Open your Router and power on - Connect wired or wireless (use information provided with your router) - Go directly to your routers Webinterface (one of 192.168.1.1 or 192.168.178.1) and search for sth like "System -> Firmware Upgrade" (There is no need to change any of the configuration)
- Download current WRT version If you are using the Hardware above: http://downloads.openwrt.org/backfire/10.03.1/ar71xx/openwrt-ar71xx-wndr3800-squashfs-factory.img
- Upload the Image in your Webinterface - Press Start - DO NOT REBOOT, POWEROFF OR ELSE - Wait until done (Power LED should not flash)
- Reconnect to your Router
- Console: telnet 192.168.1.1, set a root password passwd and REMEMBER IT
- Go to Webinterface at 192.168.1.1
- Connect the yellow port on your router to current infrastructure
- Go to "Network -> Interfaces" and activate WAN Connection with DHCP (assuming DHCP is available; you may configure DSL if you are connecting a modem)
- Navigate to "System -> Software" and press "Update Lists"
- Press "Available Software" Tab and select "C"
- Search for ChaosVPN and press "install"
( - I did also install "screen" at this point)
- ssh root@192.168.1.1 (telnet won't work anymore) - edit the top part of file /etc/tinc/chaosvpn.conf to fit your needs
$my_peerid = <nodename> $my_vpn_ip = 172.31.<your Subnet>.[1-255]
- generate your keys and send pubkey to openvpn team (fast response time) see [Howto] tincd -n chaos --generate-keys=2048
- start chaosvpn /etc/init.de/chaosvpn start
...be prepared for 150 new route entries
