Dieses Wiki ist ein Archiv bis 2023. Das aktuelle Wiki findet sich unter https://wiki.hamburg.ccc.de/
Difference between revisions of "ChaosVPN:DebianHowto"
(→6. Mail us your Infos) |
|||
Line 2: | Line 2: | ||
[[ChaosVPN|Back]] | [[ChaosVPN|Back]] | ||
− | |||
− | |||
= QUICK HOWTO FOR DEBIAN USER = | = QUICK HOWTO FOR DEBIAN USER = | ||
Line 11: | Line 9: | ||
needed to use the chaosvpn client: | needed to use the chaosvpn client: | ||
− | # apt-get install tinc iproute | + | # apt-get install tinc iproute |
needed to compile the chaosvpn-client if not using a precreated debian package for it: | needed to compile the chaosvpn-client if not using a precreated debian package for it: | ||
− | # apt-get install build-essential git | + | # apt-get install build-essential git bison flex libssl-dev zlib1g-dev debhelper devscripts |
(see below for downloadable pre-created packages) | (see below for downloadable pre-created packages) | ||
− | |||
− | |||
− | |||
− | |||
== 1. Install tinc == | == 1. Install tinc == | ||
Line 27: | Line 21: | ||
# apt-get install tinc | # apt-get install tinc | ||
− | You need either the package from Debian squeeze/unstable, or a | + | You need either the package from Debian squeeze/unstable, or a backport like from [http://debian.sdinet.de/squeeze/sdinet/tinc/ http://debian.sdinet.de/squeeze/sdinet/tinc/] or http://backports.debian.org/ |
This should be at least tinc version 1.0.13, but may work with 1.0.10 or later. | This should be at least tinc version 1.0.13, but may work with 1.0.10 or later. | ||
Line 89: | Line 83: | ||
We need the following info: | We need the following info: | ||
+ | |||
+ | (Please remove all lines starting with # from the email, they are just descriptions) | ||
<pre> | <pre> | ||
Line 147: | Line 143: | ||
Add the following lines to your /etc/apt/sources.list: | Add the following lines to your /etc/apt/sources.list: | ||
− | For Debian | + | For Debian Squeeze (Stable): |
− | deb http://debian.sdinet.de/ | + | deb http://debian.sdinet.de/ squeeze chaosvpn |
− | deb-src http://debian.sdinet.de/ | + | deb-src http://debian.sdinet.de/ squeeze chaosvpn |
+ | |||
+ | For Debian Wheezy (Testing): | ||
− | + | <s>deb http://debian.sdinet.de/ wheezy chaosvpn</s> | |
+ | <s>deb-src http://debian.sdinet.de/ wheezy chaosvpn</s> | ||
− | + | <i>Wheezy packages are not built yet, just try the version from Squeeze</i> | |
− | |||
For Debian Sid (Unstable): | For Debian Sid (Unstable): | ||
Line 188: | Line 186: | ||
For Debian Unstable: http://debian.sdinet.de/sid/sdinet/chaosvpn/ | For Debian Unstable: http://debian.sdinet.de/sid/sdinet/chaosvpn/ | ||
− | For Debian Testing: http://debian.sdinet.de/wheezy/sdinet/chaosvpn/ | + | For Debian Testing: <s>http://debian.sdinet.de/wheezy/sdinet/chaosvpn/</s> <i>Debian Wheezy support will come later</i> |
For Debian Stable / Squeeze: http://debian.sdinet.de/squeeze/sdinet/chaosvpn/ | For Debian Stable / Squeeze: http://debian.sdinet.de/squeeze/sdinet/chaosvpn/ | ||
For Debian Oldstable / Lenny: http://debian.sdinet.de/lenny/sdinet/chaosvpn/ | For Debian Oldstable / Lenny: http://debian.sdinet.de/lenny/sdinet/chaosvpn/ |
Revision as of 22:40, 18 January 2012
and AgoraLink::DebianHowto
Contents
- 1 QUICK HOWTO FOR DEBIAN USER
- 1.1 0. Install necessary helper programs
- 1.2 1. Install tinc
- 1.3 2. Create config directory
- 1.4 3. Generate keys
- 1.5 4. Devise a network-nick and a unique IP range you will be using
- 1.6 5. Hostname
- 1.7 6. Mail us your Infos
- 1.8 7. Awaiting Response
- 1.9 8. goto 6 unless $success
- 1.10 9. chaosvpn-client download and/or compile
- 1.11 10. Customize configfile
- 1.12 11. Enable Starting of ChaosVPN
- 1.13 11. script in /etc/ppp/ip-up to autostart, or to restart from time to time via cron
QUICK HOWTO FOR DEBIAN USER
0. Install necessary helper programs
needed to use the chaosvpn client:
# apt-get install tinc iproute
needed to compile the chaosvpn-client if not using a precreated debian package for it:
# apt-get install build-essential git bison flex libssl-dev zlib1g-dev debhelper devscripts
(see below for downloadable pre-created packages)
1. Install tinc
# apt-get install tinc
You need either the package from Debian squeeze/unstable, or a backport like from http://debian.sdinet.de/squeeze/sdinet/tinc/ or http://backports.debian.org/
This should be at least tinc version 1.0.13, but may work with 1.0.10 or later.
Or visit http://tinc-vpn.org/, download and build yourself - at a minimum ./configure, specify the parameter --sysconfdir=/etc, and check the binary in the script
If the tinc installation gives the following error:
> ./MAKEDEV: don't know how to make device "tun"
Then create the device by hand:
# mkdir -p /dev/net # mknod /dev/net/tun c 10 200 # chown root:root /dev/net/tun # chmod 600 /dev/net/tun
2. Create config directory
# mkdir -p /etc/tinc/chaos
3. Generate keys
# tincd -n chaos --generate-keys=2048
and press return a few times...
4. Devise a network-nick and a unique IP range you will be using
This network-nick or sometimes called nodename is the name of the network endpoint/gateway where the vpn software will be running, not necessarily the name of the user, there may even be more than one gateway per user.
Used below where <nodename> is.
Please use only characters a-z, 0-9 and _ in it.
Second please select an unused IPv4 range out of IPRanges, and write yourself down in that wiki page to mark your future range as in-use. Please select from the correct ranges, 172.31.*.* for Europe, and 10.100.*.* for North America and elsewhere.
Repeat: Please do not forget to add yourself to the list at IPRanges to mark your range as used.
Used below where <ipv4 subnet in the vpn> is.
The usage of IPv6 networks is also possible, but we do not have a central range for this (yet), you may specify an IPv6 range you received from your (tunnel) provider to be reachable over the VPN, or a private IPv6 ULA (Unique Local Address) network described in RFC4193. For more info about ULA and a network-range generator please also see http://www.sixxs.net/tools/grh/ula/ .
Used below where <ipv6 subnet in the vpn> is.
5. Hostname
The gateway may have a DynDNS (or similar) hostname pointing to a dynamic IP, or a static hostname/fixed IP.
Better supply a hostname than a raw IP address even if it is static, so you can change it youself and do not need to contact us when needed. (Perhaps something linke chaosvpn.yourdomain.example)
Used below where <clienthost> is.
6. Mail us your Infos
- send to chaosvpn-join@hamburg.ccc.de for a connection in Europe.
- send to
join@agoralink.org **currently down**chaosvpn-join@hamburg.ccc.de for a connection outside of Europe ie North America, et al.
We need the following info:
(Please remove all lines starting with # from the email, they are just descriptions)
[<nodename>] # Replace <nodename> with the network nick from step 4 gatewayhost=<clienthost> # This should be the external hostname or ip address of the client host, not a VPN address. # If the client is not reachable over the internet leave it out and set hidden=1 below. # If possible supply a hostname (even dyndns) and not an ip address for easier changing # from your side without touching the central config. network=<ipv4 subnet in the vpn> network6=<ipv6 subnet in the vpn> # (mandatory, must include) # this may be more than one, IPv4 or IPv6, network6 with IPv6 is optional # # These subnets must be unique in our vpn, # simply renumber your home network (or use something like NETMAP) with a network block that is still free. # # Please use the list of assigned networks on [[ChaosVPN::IPRanges]], and add yourself there. owner= # (mandatory, must include) # Admin of the VPN gateway, with email address - a way to contact the responsible # person in case of problems with your network link. port=4711 # (optional) # if not specified tinc works on tcp+udp port 655 # it is better if everyone chooses a random port for this. # either this specified port or port 655 needs to accept TCP and UDP traffic from outside. hidden=0 # (optional) # "I cannot accept inbound tunnel connections, I can only connect out." # (e.g. behind a NAT) silent=0 # (optional) # "I cannot connect out, but you can connect to me." # Only ONE of hidden=1 or silent=1 is possible. -----BEGIN RSA PUBLIC KEY----- .... -----END RSA PUBLIC KEY----- # (mandatory, must include) # rsa-public-key - contents of your /etc/tinc/chaos/rsa_key.pub
7. Awaiting Response
8. goto 6 unless $success
9. chaosvpn-client download and/or compile
The easiest way: Using our ChaosVPN Debian-Repository
Add the following lines to your /etc/apt/sources.list:
For Debian Squeeze (Stable):
deb http://debian.sdinet.de/ squeeze chaosvpn deb-src http://debian.sdinet.de/ squeeze chaosvpn
For Debian Wheezy (Testing):
deb http://debian.sdinet.de/ wheezy chaosvpndeb-src http://debian.sdinet.de/ wheezy chaosvpn
Wheezy packages are not built yet, just try the version from Squeeze
For Debian Sid (Unstable):
deb http://debian.sdinet.de/ sid chaosvpn deb-src http://debian.sdinet.de/ sid chaosvpn
Make the Repository-Key known:
apt-get update apt-get install debian-sdinet-keyring
Answer "y" to the one warning about unauthenticated content.
Run apt-get update a second time:
apt-get update
Finally install the ChaosVPN software:
apt-get install chaosvpn
Install Done, proceed to next step some pages below.
PS: The repositories may also be usable for Ubuntu, but that has not been tested at all.
PPS: The repositories are available for i386 (Intel+AMD x86 32bit) and amd64 (Intel+AMD x86 64bit) - users of other architectures will have to compile the chaosvpn client on their own.
The easy way: Use a pre-compiled Debian package.
Download the pre-compiled Debian package from
For Debian Unstable: http://debian.sdinet.de/sid/sdinet/chaosvpn/ For Debian Testing:http://debian.sdinet.de/wheezy/sdinet/chaosvpn/Debian Wheezy support will come later For Debian Stable / Squeeze: http://debian.sdinet.de/squeeze/sdinet/chaosvpn/ For Debian Oldstable / Lenny: http://debian.sdinet.de/lenny/sdinet/chaosvpn/
Fetch the newest *.deb file for your architecture from the correct directory above. The files ending in _i386.deb are for 32bit installs, the files ending in _amd64.deb are for 64bit installs (both intel and amd).
If there are no pre-existing files for your Debian Release and/or Architecture you need to skip to the alternative of self compiling below.
# wget http://debian.sdinet.de/lenny/sdinet/chaosvpn/chaosvpn_2.0~rc9-0.0~deb50_i386.deb (Replace link with correct file, the above is outdated and the correct changes from time to time as new packages get released)
Make sure the dependencies are already installed (most likely they are):
# apt-get install tinc libssl0.9.8 zlib1g perl-base
Install the newly downloaded package:
# dpkg -i chaosvpn_2*.deb
The software should now be installed, continue with step 10 below.
Alternative: compile yourself from our git repository
Always needed to compile:
# git clone git://github.com/ryd/chaosvpn.git # cd chaosvpn
way 1: create a git snapshot debian package
# make deb perhaps it throws an error about missing build dependencies, install these and retry. # sudo dpkg -i ../chaosvpn_2.0*.deb install the generated package file, replace filename above with real name. it is also possible to copy the generated .deb package to a different machine of the same architecture and install it there - no need to have a full compile environment on your router/firewall.
way 2: create debian package and install this
# debuild Answer the "This package has a Debian revision number but there does not seem to be an appropriate original tar file or .orig directory in the parent directory" with "y" # sudo dpkg -i ../chaosvpn_2.0*.deb install the generated package file, replace filename above with real name.
way 3: just compile and install the raw binary
# make # sudo make install
10. Customize configfile
FIXME to be expanded
/etc/tinc/chaosvpn.conf
In the top part are the variables.
change
$my_peerid to the network nick from step 4 $my_vpn_ip to an ip address in your network range, like 172.31.x.1
11. Enable Starting of ChaosVPN
If you installed ChaosVPN through our Debian packages it is not started by default.
To enable this edit the file /etc/default/chaosvpn and change the RUN= line to RUN="yes"
After all changes (re-)start the chaosvpn client:
# /etc/init.d/chaosvpn start
If you made everything correct there should now be a tinc daemon running, and the output of 'route -n' should show lots of routes pointing to the new 'chaos_vpn' network interface.
11. script in /etc/ppp/ip-up to autostart, or to restart from time to time via cron
if you built a debian package and installed it the cron and ip-up parts are already setup, if you installed it manually with make install you have to do it yourself.
and with luck, it will function beautifully! ;)
todo:
tons ;)
test in particular, and adjust docs for other linux distros, and perhaps even with *bsd